Deploying a QueryGrid Manager 2.0 VM from an Image

Prerequisite
Teradata QueryGrid Manager requires Teradata Viewpoint (Multiple Teradata Systems) installed on-premises or launched on Azure.
  1. From the Azure Marketplace portal, click located in the upper left and search for Teradata.
    A list of Teradata products appears under the Results pane.
  2. From the Azure portal, click Teradata QueryGrid Manager.
  3. Click the Basics blade to configure basic settings.
    Parameter Name Action
    Name Enter a name for the QueryGrid Manager VM.
    VM disk type Select SSD as the storage media.
    Note
    Only SSD is supported for VM disk type.

    For more information, see Storage Considerations.

    User name Enter a name of the user.
    Authentication type Select one of the following:
    Note
    For security reasons, an SSH public key is strongly recommended.
    SSH public key
    Copy and paste an Open SSH public key which can be generated with tools such as PuTTY or SecureCRT.
    Password
    Enter a password of at least 12 characters, using at least 1 lower case character, 1 upper case character, 1 number, and 1 special character. Enter the password again to confirm.
    Subscription Select a subscription.
    Resource group Select one of the following:
    • Create new and enter a name for the resource group.
    • Use existing and select an empty existing resource group.
    Location Select a location where you want to deploy the VM.
  4. Click OK.
  5. Click the Size blade to choose a VM size.
    The storage size is per node. Supported VM sizes are listed in Supporting Software VM Sizes.
    1. Click to display a list of VM sizes for the storage type you want.
    2. Click Recommended to view supported sizes, then click to highlight a VM size.
    3. Click Select.
  6. Click the Settings blade to configure optional features.
    Parameter Name Action
    Storage Storage account Create a new or select an existing storage account.
    Network Virtual network Select the virtual network that was created when the database was deployed.

    If you are using VNet peering, you can create a new virtual network.

    Subnet Select the subnet (vmsubnet) that was created when the database was deployed.

    If you are using VNet peering, you can create a new subnet.

    Public IP address Select one of the following:
    • Select None to not assign a public IP address to the VM. Instead access the VM using another jump box VM in the same VNet or through a VPN.
    Network security group (firewall) Create a new or select an existing network security group.

    For more information, see Network Security Groups and Ports.

    Extensions Extensions [Optional] Create a new or select an existing extension.
    High availability Availability set Create a new or select an existing availability set if you are deploying multiple VMs.

    For more information, see Availability Sets.

    Monitoring Boot diagnostics Click Enabled or Disabled.

    For more information, see Azure Diagnostic Logs.

    Guest OS diagnostics Click Enabled or Disabled.

    For more information, see Azure Diagnostic Logs.

    Diagnostics storage account If you enabled either boot diagnostics or guest OS diagnostics, select the storage account where you want to place the diagnostic files.
    A summary appears.
  7. Click the Summary blade, review the summary, and click OK.
  8. Click the Buy blade, review the terms of use and privacy policy, and click Purchase.
    This process takes approximately 15 minutes depending on your configuration and the availability of resources in your region.
    Note
    Trying to SSH into the VM may cause the creation of the VM to fail. Do not try to SSH into the VM until either you get confirmation the VM has been created or you receive a failure notification.
  9. To monitor the VM creation progress, do the following from the Azure portal:
    1. Click to see notifications to determine if the deployment has started.
      Notifications send alerts only if you have set them prior to starting the deployment.
      The Deployment blade opens. Under Operation details, a blue status symbol appears in the first column next to each resource to indicate the deployment process is continuing.
    2. Click located at the top of the right pane to refresh the pane.
      Under Operation details, the blue status symbol changes to a green check mark in the first column next to each resource to indicate the deployment process has finished.
    3. Under Summary, when the STATUS displays Succeeded, the VM has been created.
    4. Under Summary, select the resource group.
      The right pane displays the resources that were created.
Postrequisite
Complete the applicable procedures under Teradata QueryGrid Configuration.

results matching ""

    No results matching ""